Still, we have tried to simplify the steps to make them universal to all router owners.Įnabling DHCP is done via router firmware, browser address bar, or a dedicated security app.
#ROUTER ON A STICK CONFIG WITH DHCP HOW TO#
The process differs depending on the make and model of your router, such as when you are trying to learn how to connect two WiFi extenders. This command displays some important information about the DHCP pool(s) configured on the device – the pool name, total number of IP addresses, the number of leased and excluded addresses, subnet’s IP range, etc.To access your admin panel, try entering your router’s IP address into a web browser address bar. To display information about the configured DHCP pools, you can use the show ip dhcp pool command: Floor1#show ip dhcp poolĬurrent index IP address range Leased/Excluded/Totalġ92.168.0.1 192.168.0.1 - 192.168.0.254 1 / 1 / 254 Since we’ve excluded the IP addresses from the 192.168.0.1 – 192.168.0.50 range, the device got the first address available – 192.168.0.51. In the output above you can see that there is a single DHCP client that was assigned the IP address of 192.168.0.51. IP address Client-ID/ Lease expiration Type To view information about the currently leased addresses, you can use the show ip dhcp binding command: Floor1#show ip dhcp binding the DNS server’s IP address is 192.168.0.1.the default gateway’s IP address is 192.168.0.1.the IP addresses assigned to the hosts will be from the 192.168.0.0/24 range.
If you don’t specify this argument, the default lease time of 24 hours will be used.
DHCP employs a client-server architecture a DHCP client is configured to request network parameters from a DHCP server on the network. – IP addresses, subnet masks, default gateways, DNS servers, etc. Dynamic Host Configuration Protocol (DHCP) is an application layer protocol used to distribute various network configuration parameters to devices on a TCP/IP network.